microphone's behavior in the ACC Client. For other cameras this option is not available.
Use the
Microphone Muting
drop-down menu to set the microphone's behavior. The default
setting is
Never Mute
.
l
Never Mute
: Allows the ACC Client users to always listen to audio from the camera at
any time.
l
Always Mute
: Prevents the ACC Client users from listening to audio from the camera.
This may be required by some local privacy laws. When an intercom call is initiated, the
ring tone will be muted and only the pop-up dialog will appear in the ACC Client.
l
Unmute Only During Call
: Allows the ACC Client users to always listen to audio from
the camera when an intercom call is in progress.
4. Click
Apply
to save your changes.
Users
On the Users page, you can add new users, edit existing users, and change passwords.
Adding a User
1. On the Users page, click
Add...
.
2. On the Add User page, enter a User Name and Password for the new user.
3. In the
Security Group
drop-down list, select the access permissions available to this new user.
l
Administrator
: full access to all the available features in the camera web interface, including
PTZ controls
l
Operator
: has access to the Live View and PTZ controls but limited access to the Setup
features. The user can access the General page, Image and Display page, Compression and
Image Rate page, Motion Detection page, Privacy Zones page, Digital Inputs and Outputs
page, Microphone page and the Speakers page. The new user can also configure onboard
storage settings but cannot delete video recordings or format the SD card.
l
User
: has access to the Live View and optional PTZ controls, but cannot access any of the
Setup pages. To enable the PTZ controls, select the Use PTZ Controls check box.
4. Click
Apply
to add the user.
Editing Users and Passwords
1. On the Users page, select a user from the User Name (Security Group) list and click
Modify
.
2. To change the user’s password, enter a new password for the user.
3. To change the user’s security group, select a different group from the
Security Group
drop-down list.
Note:
You cannot change the security group for the administrator account.
Users
43