l
Device's web browser interface: http://
<camera IP address>/
.
l
Network Video Management software application (for example, the Avigilon Control Center™
software).
l
ARP/Ping method. For more information, see
Setting the IP Address Using the ARP/Ping Method
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
l
Web browser interface: http://
< camera IP address>/
.
l
Network Video Management software application (for example, the Avigilon Control Center™
software).
(Optional) Configuring Onboard Storage
To use the camera’s onboard storage feature, you must insert 1 microSD card into a microSD card slot. While
there are two microSD slots, currently the camera only supports a single microSD card in either slot for
onboard storage. For the location of the microSD card slots, see
.
It is recommended that the microSD card have a capacity of 64 GB or more. Video Speed Class microSD
card required, with Class V10 or better recommended. If the microSD card does not meet the
recommended capacity or write speed, the performance of the onboard storage may suffer and result in the
loss of frames or footage.
Ensure the microSD card is designed for continuous video recording or the microSD card life expectancy
may be adversely affected.
1. Insert the microSD card into the camera.
CAUTION —
Do not force the microSD card into the camera or you may damage the card
and the camera. The card can only be inserted in one direction.
2. Access the camera’s web interface to enable the onboard storage feature. For more information, see
the
Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide
.
(Optional) Enabling the Microphone
This camera features an internal microphone, and include a switch to physically enable or disable the
microphone. The microphone switch is set to OFF by default.
It is recommended that you enable the microphone before installing the camera in its final location.
Accessing the Live Video Stream
55
