Chapter 14
Scan
This feature allows you to monitor traffic on different channels by scanning a programmed list of
channels. Scanning is halted if you initiate a call and resumes when the call has ended.
14.1
Toggling the Scan Feature On and Off
Procedure:
Perform one of the following actions:
Option
Actions
To turn on Scan, turn the preprogrammed
2–Position Con-
centric
switch to the scan position.
a
From the
Home
screen, tap
Radio Quick Settings
.
b
To toggle the scan feature on and off, tap
Scan
.
14.2
Making a Dynamic Priority Change (Conventional Scan Only)
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One channel) to the Priority-Two channel. This change
remains in effect until scan is turned off. Scan then reverts to the default setting.
Procedure:
From the
Home
screen, tap
.
14.3
Deleting Nuisance Channels
If a channel continually generates unwanted calls or noise (termed “nuisance” channel), you can
temporarily remove the unwanted channel from the scan list. This capability does not apply to priority
channels or the designated transmit channel.
Procedure:
From the
Home
screen, tap
Nuis Del
.
MN009207A01-AA
Chapter 14 : Scan
64
