7.24.12.1
Enabling Transmit Inhibition
Procedure:
1
Press the
Transmit Inhibit
programmable button.
NOTE:
If the user has disabled TX Inhibit using the menu and then moves the switch to
the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows
Tx inhibit on
. You hear a sequence of short, low
‐
high tones to indicate
that transmission is inhibited.
Pressing
PTT
triggers the radio sounds a constant short, low
‐
pitched tone (reject tone).
NOTE:
The status of the Transmit Inhibit does not change after the radio powers up.
7.24.12.2
Disabling Transmit Inhibition
Procedure:
1
Press the Transmit Inhibit programmable button.
NOTE:
If the user has disabled TX Inhibit using the softkey and then moves the switch to
the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows
Tx inhibit off
. You hear a sequence of short, high
‐
low tone (Transmit
Inhibit Off tone) to indicate that the transmission is back to normal operation.
MN006727A01-AE
Chapter 7 : Advanced Features
72
