5
Release the
PTT
button to receive.
You hear a Transmit End Tone.
7.10.2
Responding to Evacuation Indicator
When and where to use:
The Incident Commander can trigger one of sixteen Tactical Alerts from
the Command Terminal. These alerts can target individuals or groups of users within the Fireground
Communication System. The ergonomic (visual and audible) response for the Tactical Alerts can be
customized.
Your radio sounds the audible response at the profile maximum alert tone volume level. The display
shows the configurable programmed alert text and intelligent lighting.
Procedure:
1
Perform one of the following actions:
• Press the radio
Top Side
button.
• Press the RSM
Side Button 1
if the radio is connected to RSM.
• Press the
PTT
button.
PTT
button must be configured in Customer Programming Software
(CPS) to enable this function.
The radio cancels the indications, a tone sounds and the radio sends an acknowledgment to the
command terminal.
NOTE:
Move the
Volume Control Knob
to adjust the volume of the audible alert from
full volume.
7.11
Sending Evacuation Tone
This feature enables the evacuation tone to be heard on the transmitting radio and on any radio that is
able to receive the tone instruction.
Procedure:
Once the tone begins to sound, if the orange button is released the tone continues to alarm on all
radios within the talkgroup, until the
PTT
button is released.
NOTE:
Radio does not transmit evacuation tone if the radio is in secure mode.
7.12
Tactical Public Safety (Conventional Only)
Tactical Public Safety (TPS) enables the member of a group to identify the start and the end of a
transmission by displaying the caller name or ID on the radio display.
7.12.1
Using TPS Normal Transmission
Procedure:
At TPS Zone Channel, perform one of the following actions:
• Press
PTT
button to transmit. Talk clearly into the microphone. Release
PTT
button to listen.
• Receive and listen to call, the radio displays the caller’s name or ID.
MN006727A01-AE
Chapter 7 : Advanced Features
51