If unsuccessful, a tone sounds to indicate that the selected channel does not support emergency
and rejects to launch emergency mode.
2
The microphone remains active for the hot mic time specified in your radio's codeplug
programming.
3
To exit Emergency Call, press and hold the preprogrammed
Emergency
button.
Turning off the radio also cancels the emergency state.
7.9.10
Sending a Silent Emergency Alarm
When and where to use:
This feature allows you to send an Emergency Alarm to the system without
triggering any audio or visual indicators.
Procedure:
1
Press the preprogrammed
Emergency
button.
The display shows no changes, the LED does not light up, and you hear no tones. The silent
emergency state continues until you perform the next step.
2
Perform one of the following actions:
• Press and hold the preprogrammed
Emergency
button for about a second to exit the Silent
Emergency Alarm mode.
• Press and release the
PTT
button to exit the Silent Emergency Alarm mode and enter regular
dispatch or Emergency Call mode.
7.9.11
Emergency Find Me
When the radio is in Emergency mode, the Emergency Find Me feature transmits Bluetooth Low
Energy (BTLE) signals and other emergency information to nearby radios.
Contact your system administrator for more information.
7.9.11.1
Receiving Emergency Beacons
When and where to use:
The receiving radio displays
Beacon Received
, the transmitting radio Contact ID, or alias. The
following methods are options on how to receive the beacon.
Procedure:
1
Perform one of the following:
• Tap
Details
to view the beacon list.
• Tap
Dismiss
to dismiss the beacon.
NOTE:
If there are multiple beacons, the radio displays the recent beacon received.
7.10
Fireground
The portable Fireground Communications System is designed for deployment at an incident scene.
MN006727A01-AE
Chapter 7 : Advanced Features
49