Motorola solutions ADVISOR TPG2200 TETRA Manual Download Page 42 | Manualshive

Page: 42 / 75

background image

exiting TXI mode, your radio prompts you to accept or reject the Call-Out message. To continue in
TXI mode, exit the Call-Out prompt instead.

DMO

The Call-Out feature is supported in DMO.

Gateway

The Call-Out feature is supported in Gateway.

Call-Out Test

The dispatcher can test the feature by using the Call-Out test. The radio then displays

Call-Out

Test

and generates the alert tone. A

Soft

key is available in the MMI with the label

Test OK

. After

responding to it, the display returns to the previous mode.

Storm plan alert is a special case of Call-Out. This alert is sent out to the larger group of people. You
can respond to it with any key stroke. After responding, you proceed to the information phase. The
storm plan alert is sent several times to raise reliability.

You can configure the storm plan severity to either Severity 0 or Severity 15 using the CPS.

2.17.2

Call-Out Reminder Phase

Your radio enter the Call-Out Reminder Phase after Alert Phase.

Call-Out Reminder Phase indicator:

• Reminder tone.

• Reminder Vibration

• LED Reminder - Blue.

• LCD backlight flashing reminder.

The Call-Out reminder indication stay active for the duration of Call-Out Reminder Alerting Period.
Pressing any key shall dismiss the reminder indication.

The radio will display the Call-Out reminder phase with the following options:

•

Messages

, or

•

Exit

.

NOTE:

You can choose to dismiss the reminder phase instead of reading the missed Call-Out

message. Message is considered read if user responded while message is considered unread if
no response from user.

You are allowed to configure the interval and duration parameters for the unread Call-Out reminder,
per user profile.

2.18

Global Positioning System (GPS) Location Service

NOTE:

This is a Software Selling Feature.

The GPS Location Service feature uses information from GPS satellites orbiting the Earth to determine
the approximate geographical location of your radio.

The GPS Location Service availability, accuracy, and the position calculation time vary depending on
the environment in which you use the radio. The GPS Location Service can assist your dispatcher or
colleagues in many ways such as more efficient deployment of resources or locating your radio when
you trigger your emergency service.

MN003465A01-AF
Chapter 2 : Services and Features

42

«
...
40
41
42
43
44
...
»

Summary of Contents for ADVISOR TPG2200 TETRA












































































Reviews:

No comments

Related manuals for ADVISOR TPG2200 TETRA

Brand: SwissPhone Pages: 2

Brand: USAlert Pages: 16

Brand: Daviscomms Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands