MOTORINO XML OWNERS’S MANUAL
The bike is recommended to be subject to regular inspection and maintenance in the MOTORINO XML
Service Center at every 3,000 km or six months (whichever comes first).
TIPS:
Please disconnect the air switch before cleaning.
Do not use strong water jet to directly wash it, so as to avoid the fault of mechanical parts caused by being
damped.
Common Problems and Troubleshooting Methods
Regular maintenance can improve the service life and driving safety of the TS smart electric bikes. Please
refer to the following suggestions and take care of your bike.
Routine cleaning and maintenance
Failure
Causes
Solutions
The bike has no
electricity, and the
start button does
not shine
1. Battery is poorly
connected
2. Air switch is not turned
on
1. Connect the battery properly at its main plug
2. Turn on the air switch
When turning the
speed regulating
steering handlebar,
the motor does not
turn after being
powered
1. Low battery
2. Side stand is not retracted
3. Parking key is not closed
4. Brake handle does not
reach the right position
5. Steering handlebar failure
6. The controller plug is
loose
7. Controller failure
1. Charge the battery
2. Put away the side stand
3. Close the parking key
4. Place the brake handle at the right position
5. Change handlebar
6. Re-plug controller
7. Change controller
Speed is slow or
mileage is short
1. Low battery
2. Under-inflated tire
3. Heavily overloaded
4. Brake pads interference
5. Battery aging or normal
scrap
1. Charge the battery
2. Inflate the tire, and check the tire pressure before
riding
3. Foster a good habit, and keep the appropriate load
4. Change the brake pads and check the brake system
before riding
5. Change battery
Battery cannot be
charged
1. Poor contact of the main
plug of the charger
2. Do not use the correct
charger
1. Check whether the main plug is in a right place
2. Use the special charger of the MOTORINO XML
3. Change battery
2017 Greenwit Technologies Inc.
Page 20 of 28
Summary of Contents for XMl
Page 1: ......