MAGNA-STITCHER
TM
Plastic Repair System
Model MS-2500
WARNING:
Read and understand all instructions before attempting to operate tool.
Failure to follow instructions may result in electric shock, fire and/or serious
personal injury.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of serious
injury and/or property damage,
observe all warnings and
instructions while operating the
tool.
Keep work area clean and well
lit. Maintain tool in top condition and
obtain service from manufacturer if
tool malfunctions. Use only
accessories and replacement parts
that are provided by the
manufacturer.
This tool must be connected to a
properly grounded outlet
installed
in accordance with all local codes
and ordinances. Never remove the
grounding prong or modify the plug
in any way. Do not use adapter
plugs. Consult an electrician if you
are in any doubt as to whether the
plug is properly grounded. Avoid
bodily contact with grounded
surfaces.
Always wear proper personal
protection when operating welder.
A full face shield per ANSI Z87.1-
2003 standard is required at all times
to protect face and eyes against
injury from flying parts. Adequate
gloves and clothing are required to
reduce the risk of burns. Allow parts
to cool before handling.
Do not operate tool in explosive
atmospheres
, such as in the
presence of flammable liquids,
gases or dust. Welders create
sparks which may ignite dust or
fumes. Use in well ventilated areas
only. Welders generate heat which
can ignite surrounding materials
causing fires.
SAVE THESE INSTRUCTIONS
IF YOU HAVE ANY QUESTIONS ABOUT THE OPERATION OF PRODUCT CALL TOLL FREE
800-227-2822
8:00 am to 5:00 pm - Pacific Time - Monday through Friday
INSTRUCTIONS