INSTRUCTION MANUAL
Magna-Spot
®
Studwelder
Models JO1000, JO1500, JO2000
*
WARNING:
Read and understand all instructions before attempting to operate tool.
Failure to follow instructions may result in electric shock, fire and/or serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
*
8
To reduce the risk of serious injury and/or property
damage, observe all warnings and instructions while
operating the welder.
Keep work area clean and well lit.
Maintain tool in top condition and obtain service from
manufacturer if tool malfunctions. Use only accessories
and replacement parts that are provided by the
manufacturer.
This welder must be connected to a properly
grounded outlet
installed in accordance with all local
codes and ordinances. Never remove the grounding
prong or modify the plug in any way. Do not use adapter
plugs. Consult an electrician if you are in any doubt as to
whether the plug is properly grounded. Avoid bodily
contact with grounded surfaces.
+
!
To reduce the risk of electrical shock:
Do not expose
welder to rain or wet conditions. Water entering tool will
increase the risk of electrical shock. Unplug welder when
not in use. Do not operate welder with any portion of the
housing removed. Disconnect welder from power supply
before servicing any part of the welder. Failure to follow
these instructions will increase the risk of electrical shock.
Do not operate tool in explosive atmospheres
, such
as in the presence of flammable liquids, gases or dust.
Welders create sparks which may ignite dust or fumes.
Use in well ventilated areas only. Welders generate heat
which can ignite surrounding materials causing fires. Do
not use welder on body panels containing insulating
material which may be ignited by the heat.
+
O
Do not abuse power cord.
Never use the power cord for
carrying, pulling or unplugging the welder. Keep power
cord away from heat, sharp edges and moving parts.
Replace power cord immediately if it becomes damaged.
Damaged cords increase the risk of electrical shock.
A
Always wear proper personal protection when
operating welder.
Proper eye protection is required to
reduce the risk of eye injury from sparks and molten
metal. Adequate gloves and clothing are required to
reduce the risk of burns. Allow parts to cool before
handling.
SAVE THESE INSTRUCTIONS
IF YOU HAVE ANY QUESTIONS ABOUT THE OPERATION OF PRODUCT CALL TOLL FREE
800-227-2822
8:00 am to 5:00 pm - Pacific Time - Monday through Friday