manualshive.com logo in svg

Motocaddy S1 Pro DHC, Instruction Manual

The Motocaddy S1 Pro DHC is a top-of-the-line electric trolley designed to make your golfing experience even more enjoyable. Ensure you make the most of your trolley by downloading the free Instruction Manual from manualshive.com. This comprehensive manual provides all the information you need to get the most out of your trolley.

Share
Download
background image

Page 14

Using the USB Charging Port

This Motocaddy trolley features a USB charging port designed to power GPS devices during your round.

Simply remove the covering cap and plug a USB cable into the charging port located on the underside of the handle. The 
device will continue charging for the duration of time that the cable is attached and the battery is connected.

It is important to note that the speed of charge will be lower than that of a mains AC charger and similar to plugging the 
device into a PC.

The USB charger takes power from the main trolley battery and continuous charging will reduce the battery capacity between 
charges. The trolley is designed to disable the USB port when the battery capacity reaches a preset level. 

Using the USB Charging Port 

Summary of Contents for S1 Pro DHC

































Reviews:

No comments

Related manuals for S1 Pro DHC

Brands by name

Popular brands

Load more brands