Version C - 2022/07/20
MOTOBLINKERS MBK1
PAGE 1
[ENGLISH]
MOTOBLINKERS MBK1
REMOTE CONTROLLED HORSE BRIDLE
OPERATING INSTRUCTIONS (EN)
REMOTE CONTROLLED HORSE BRIDLE QUICK START
The remote controlled horse bridle quick start is as follows:
Unpack all the delivered items
Grab the bridle at its top
Press the button on the remote control 2 times in a row a few seconds apart
If nothing happens (likely), wake up the blinders by quickly changing their position once (otherwise they go back to
sleep)
Press again the button on the remote control 2 times in a row a few seconds apart
Blinders must change their position at least once
REMOTE CONTROLLED HORSE BRIDLE OPERATION
The remote controlled horse bridle operation is very simple. Each press of the button on the remote control, the blinders
simultaneously change their position from hiding to non-hiding or vice versa.
For correct operation, it is necessary:
That the batteries are not discharged (see associated chapter)
That the blinders are waked up (see associated chapter)
That the button presses are separated by a few seconds
That the remote control is not to far or hidden (wall, etc.) from the blinders
SLEEP AND WAKED UP MODE OF THE BATTERY POWERED ITEMS
Putting the items in sleep mode dramatically increases the life of the batteries.
The remote control automatically enters sleep mode when its button is released.
Each blinder automatically enters sleep mode after 60 minutes of non-use or manually by forcing a quick rotation to one side
or the other.
The wake up of the remote control is triggered each time the button is pressed.
The wake up of the blinder is achieved by manually forcing a quick rotation to one side or the other (idem to enter sleep mode).
It is advisable to check that the blinders are effectively in sleep mode by pressing the remote control push button.