MOTO GUZZI V85 E4, Service Station Manual

Page: 42 / 108

Assembling the gearbox
•
In case of secondary oil seal replace-
ment of the cardan on the gearbox cov-
er, use the special punch until it stops.
Specific tooling
020978Y Cardan secondary oil seal mounting
punch
•
Use commercial punches to insert the bearings on the gearbox crankcases.
•
A special punch must be used to insert
the bearings on the seats of the pri-
mary/secondary shaft with lubrication
duct.
Specific tooling
GU19926500 Punch for transmission case
bearing external ring
•
After installing the bearings on the gearbox crankcasings, position the bulkheads and the
safety washers/plates, and tightening them with the appropriate screws to the prescribed
torque.
Engine
Engine V85 E4
ENG - 42