MOTO GUZZI V85 E4, Service Station Manual, Page: 41 / 108

WEAR LIMITS
Specification Desc./Quantity
Maximum wear limit for the selection gear grooves 22.78 mm (0.896 in) with rollers diam. 3.5 mm (0.14 in)
Minimum wear limit of the cardan shaft side secondary shaft
seats
23.294 mm (0.9171 in) with rollers diam. 3.0 mm (0.12 in)
Minimum wear limit of the clutch side primary and secondary
shaft seats
24.112 mm (0.9493 in) with rollers diam. 2.0 mm (0.08 in)
Checking the clutch shaft
Check for pitting, wear, cracks or damage, signs
of deterioration on the teeth of the primary drive
gear and replace the gear if necessary
WEAR LIMITS
Specification Desc./Quantity
(1) Minimum wear limit of the rotation point on the gearbox
cover bearing
19.975 mm (0.7864 in)
(2) Minimum wear limit of the rotation point on the gearbox
cover base
24.987 mm (0.9837 in)
Checking the desmodromic drum
Check the desmodromic drum for damage, scratches and wear and replace the assembly if required.
Checking the forks
Check that the forks have the work surface well
smooth and not worn, so to lose its quenching
characteristics and that the nibs that are working
in the drum grooves are not too worn, otherwise
replace the forks.
WEAR LIMITS
Specification Desc./Quantity
(1) Minimum thickness of the tines 4.75 mm (0.19 in)
(2) Guide pins minimum diameter 8 mm (0.31 in)
(3) Sliding hole minimum diameter 14 mm (0.55 in)
Engine V85 E4
Engine
ENG - 41