MOTO GUZZI V85 E4, Service Station Manual

Page: 39 / 108

•
Remove the lower fork No.3 (4)
•
Remove the primary and secondary
shaft, as well as the intermediate fok
No. 2
Disassembling the clutch shaft
•
To remove the clutch shaft it is neces-
sary to remove first all gearbox com-
ponents (the input shaft, the secondary
shaft, fork travel shaft and the forks,
gearbox selector).
•
At this point, the clutch shaft can be re-
moved with a few mallet taps, paying
attention to retrieve the shimming
washer.
•
Remove the oil seal from the clutch
shaft
WARNING
IN CASE OF OIL SEAL REPLACEMENT, WHEN REFITTING
USE THE SUITABLE PUNCH UNTIL IT REACHES THE END
Specific tooling
020976Y Clutch control dust guard mounting
punch
Engine V85 E4
Engine
ENG - 39