MOTO GUZZI V85 E4, Service Station Manual

Page: 10 / 108

H
EAD
- V
ALVES
Pos. Description Type Quantity Torque Note
1 Stud bolts for exhaust manifolds M8 4 20-24 Nm (14.75-17.70
lb ft)
-
T
IMING SYSTEM
Pos. Description Type Quantity Torque Note
1 Tone wheel flanged hex head screw M7x18 1 16-17 Nm (11.80-12.54
lb ft)
Pre-applied Loct. -
3M SCOTCH-GRIP
2363 or PRELOK
PRECOTE 80 or
Loct. 2048
2 Timing system sprocket flanged hex
head screws
M6 3 9-11 Nm (6.64-8.11 lb
ft)
Pre-applied Loct.;
alternatively 3M
SCOTCH-GRIP
2353
3 Chain tensioner screw M6 1 9-11 Nm (6.64-8.11 lb
ft)
-
4 Camshaft retainer plate torx rounded
head screws
M5x12 2 6-7 Nm (4.42-5.16 lb ft) Pre-applied Loct.;
alternatively 3M
SCOTCH-GRIP
2353
5 Rocker axles forks hex head flanged
screws
M5x12 4 5-6 Nm (3.69-4.42 lb ft) Loct. 243
6 Flanged HH screws for ground plates
on rocker supports
M5x12 2 5-6 Nm (3.69-4.42 lb ft) Loct. 243
7 Stud bolt fixing nuts (pre-tightening) M10 8 13-16.6 Nm (9.59-12.24
lb ft)
Lubricate the
threads and the
support surface with
MOLYCOTE
GRAPID PLUS
SPRAY grease
7 Stud bolt fixing nuts (final tightening) M10 8 87°-93° - 24-34 Nm
(17.70-25.08 lbf ft)
Lubricate the
threads and the
support surface with
MOLYCOTE
GRAPID PLUS
SPRAY grease
Characteristics
Engine V85 E4
CHAR - 10