INSTALLATION AND SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
SAFETY PRECAUTION
• WARNING –To make sure power is off before attempting installation.
• WARNING – Support Directly From Building Structure.
• WARNING –To reduce the risk of fire, electric shock, or injury to persons, unplug or disconnect the
appliance from the power supply before the fan installation, cleaning, or servicing.
• WARNING –To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State
Speed Control Device.
• WARNING –To Reduce The Risk Of Personal Injury, Do Not Bend The Blade Brackets When Installing
The Brackets, Balancing The Blades, Or Cleaning The Fan. Do Not Insert Foreign Objects In Between
Rotating Fan Blades.
• The installation is to be in accordance with the National Electrical Code, ANSI/NFPA 70-1999 and local
codes. Consult a qualified electrician if in double.
• WARNING – To Reduce The Risk Of Electric Shock, This Fan Must Be Installed With A General-Use,
Isolating Wall Control/Switch.
• All set screws must be checked, and retightened where necessary, before installation.
• After making the wire connections, the wires should be spread apart with the grounded conductor and
the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the
other side of the outlet box.
• The splices after being made should be turned upward and pushed carefully up into the outlet box.
• Conductor of a fan identified as grounded conductor to be connected to a grounded conductor of power
supply, conductor of fan identified as ungrounded conductor to be connected to an ungrounded conductor
of power supply, conductor of fan identified for equipment grounding to be connected to an
equipment grounding conductor.
• CAUTION–To Reduce The Risk Of Electric Shock, Disconnect The Electrical Supply Circuit To The Fan
Before Installing Light Kit.
• WARNING – To reduce the risk of fire, electric shock, or personal injury, mount directly to a
structural framing member of to an outlet box marked (acceptable for fan support of 22.5 kg(50
lbs) or less). For outlet box mounting, use mounting screws provided with the outlet box.
1