Clean PAP Mask and Tubing
Insert Filter into Bag and connect mask to tubing, and place into
bag. Close bag around tubing using velcro. Attach Clean-Z to end
of tubing. Connector adapter might be needed based on your
PAP equipment.
Clean CPAP Device and Tubing
Connect Clean-Z to CPAP tubing, and then the tubing to the
PAP Device. Connector adapter might be needed based on your
PAP equipment.
Start Cleaning Process
Connect power supply to Clean-Z, and plug into electrical outlet.
Press Power button and Clean-Z will start and automatically run
through a complete cleaning cycle.
Insert
Filter
Mask
Inside
Power
Button
Clean-Z Quick Guide
| Assemble Unit
1
