3
1.4 Waste disposal
●
Important: Any damaged biological microscope must not be treated as
general waste; it should be disposed of according to relevant regulations.
1.5 Operation
When using the biological microscope, please pay attention to the following
safety instructions:
●
If it is used for any purpose other than the specified ones, including any
individual component or part, the manufacturer will not take any
responsibility.
●
After-sales service or repair done by unauthorized personnel will void the
warranty.
●
Anyone who uses the instrument should receive instruction on the proper
handling of the instrument and safety practices for microscopy. The
biological microscope shall be placed only on a firm, flat workbench for
operation.
●
Since the biological microscope is a precision instrument, improper
operation will impair or spoil its performance.
●
The power unit is integrated in the main unit of the biological microscope:
the grid supply voltage is within 100-240V~50Hz.
The biological microscope must be connected only to the normal
power socket with a grounding terminal. Any extension cord without
ground protection is not allowed to avoid failure of the protection
function.
If there is any electrical failure (of the fuse system, ground protection
or transformer), turn off and unplug the unit immediately. Make sure
the microscope is set aside so it will not be used again and contact the
Motic service department or a Motic microscope repair agency to have
it
repaired.
Please be sure to turn off the power before opening the instrument to
replace LED illuminator or replace the fuse! Only use a fuse for the
rated
current.
