32
Mother’s Choice |
prime AP convertible booster seat
Cleaning covers and headrest
HEADREST COVER: Adjust the booster seat headrest to its highest position.
Separate velcro from around sash guides and back of headrest to remove cover.
MAIN BODY COVER: Separate velcro at the back of the seat. Pull around the
armrest and remove cover off the seat. Ensure you free the elastic under seat and
that it is not caught on cup holders.
•
The seat covers can be machine washed in lukewarm water on the
‘delicate’ cycle.
•
Tumble dry for 10 - 15 minutes on low heat.
•
DO NOT BLEACH
•
DO NOT DRY CLEAN
•
DO NOT IRON
•
Once they are fully dry, they should be refitted in the following sequence:
FITTING THE HEADREST COVER
Extend the booster seat headrest to its highest
position then fit the headrest cover by stretch-
ing it over the headrest and securing velcro
tabs around the sash guide.
FITTING THE MAIN BODY COVER
Start by fitting on the armrest, then place the
trim on the back. Pull elastic under the base
and over the cup holders, then fasten the
velcro under the base and on
the back of the trim.
CARE AND MAINTENANCE
