23
Mother’s Choice |
prime AP convertible booster seat
INSTALLATION
Release:
Press the red button to release the buckle.
FASTENING THE BUCKLE ASSEMBLY
1.
Loosen the top tether strap. Place
restraint on back seat of vehicle
in line with a top tether strap
anchorage point.
2.
Hold the lap-sash belt together
and start under the armrest. Feed
the lap-sash belt through the front
of the seat, through the
YELLOW
forward-facing belt path.
3.
Place your hand behind the seat
and pull the belt across the back.
4.
Feed the lap-sash belt through the
opening in the back of the seat,
marked as the
YELLOW
forward-
facing belt path.
5.
Fasten the seatbelt, ensuring you
hear a ‘CLICK’.
6.
Reposition the sash-belt from the
outside of the seat to the inside.
The sash-belt should lay as shown
as pictured.
NOTE: Before you start installation, adjust the shoulder straps to fit
your child.
Refer to
page 19
.
PUSH
LOOSEN TETHER
BEHIND
SEAT
CLICK
INSTALLATION - HARNESS MODE
