background image

• vvv

35

journey

warranty

Australian

Standard

SAI Global

AS/NZS 1754 Lic 40071

Dorel Australia Pty Ltd warrants your new product to be free from defects in 
materials and workmanship for 6 years on the seat & 2 years on the trim, from 
the date of purchase, provided that the product is used in accordance with 
accompanying recommendations or instructions where provided. The benefit of 
this warranty is in addition to your rights under the Australian Consumer Law and 
to other rights and remedies of the consumer under a law in relation to the goods 
or services to which the warranty relates.

Dorel Australia Pty Ltd will provide you with your choice of a refund, repair, or 
exchange (where possible) for this product if it becomes defective within the 
warranty period. Dorel Australia Pty Ltd will bear the reasonable expense of 
claiming the warranty. This warranty will no longer apply where the defect is a 
result of alteration, accident, misuse, abuse, or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service 
team on Ph: 

1300 809 526 or alternatively, via our website at www.dorel.com.au 

for any difficulties with your product. Warranty claims and claims for expense 
incurred in returning this product can be addressed to our Consumer Service team 
at 

655-685 Somerville Road, Sunshine West, VIC, 3020. Hours: 8:30 am to 

5:00 pm, Monday to Friday.

For New Zealand please contact Customer Service Centre, 

14 Sir William Avenue, 

East Tamaki, Auckland, 2013. Auckland: (09) 2741040 NZ wide: 0800 628 000 
(Toll Free). Hours: 8:00 am - 5:00 pm, Monday to Friday.

Our goods come with guarantees that cannot be excluded under 
the Australian Consumer Law. You are entitled to a replacement or 
refund for a major failure and compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of acceptable quality and 
the failure does not amount to a major failure.
 

IMPORTANT: KEEP THIS INSTRUCTION MANUAL 
                       

 

IN THE POCKET PROVIDED.

Summary of Contents for journey





































Reviews: