Mothers choice journey, Instruction Manual

Page: 14 / 36

• vvv
14
journey
preparing seat to fit child
Lift the harness release lever at the front
of the seat (between trim cover opening).
Pull both shoulder straps simultaneously
to loosen harness.
Undo the straps from the splitter plate
on the back of the child restraint.
Re-thread the shoulder straps through
the desired slots, ensuring the harness is
pulled all the way through the plastic shell
and trim, and that the harness straps and
adjuster strap are not twisted. Reconnect
the straps to the splitter plate.
Press red button to release buckle
assembly for ease of child fitment.
Place child in seat.
Fasten buckle assembly ( see page 18).
Pull the harness adjustor strap at the
front of the seat until the shoulder
straps lay firmly against the child.
You MUST make these adjustments to your child restraint before
you install the seat in the vehicle. Please adjust harness according
to the toddler shoulder height marker prior to installation.
1
2
3
4
5
6
to adjust shoulder strap height:
to tighten harness:
2
1
4
6
CLICK!
SPLITTER PLATE
5
3
Strap can be
next slot above
Strap cannot
be more than
25mm below
Important: The shoulder straps must
be in the slots which are nearest to the
child’s shoulders, but not more than
25mm below the child’s shoulders.
Child shoulders