@
@
User Guide
MOTORIZE OUR WORLD
R
CB4M-S Quad Synchronous Control Box
M o d e l : C B 4 M - S & D K P 3
Model Name
：
CB4M-S: Quad synchronous control box
DKP3:
Desk control panel
Product Introduction
：
The set of CB4M-S quad synchronous control box and DKP3 desk control panel is applied to
lifting desk. It is able to control and adjust the lifting desk to up and down and to work with
the model of FD60 actuator.
A. Install and Learning procedure:
1. Whe CB4M-S and DKP3 are connected and power on at the first time, the display of
DKP3 flashes “SEt”. Only learing procedure can be excuted now.
2. Learning: Hold buttons
and
together for 2 seconds, the display flashes “SEt”
and the 4 actuators start to run full stroke to record the positions of upper and lower
limits. The table will go down to the bottom and up to the top position. Then go down to
the bottom position again. After the learning procedure is finished, the display shows
still sign of “000” and it can be operated.
3. The unit has to run the full stroke learning procedure after reinstalled on the other table.
4. Pressing any buttons or unplugging the panel can stop table from learning procedure.
5. The unit will memorize the full stroke of the table after finishing the learning procedure.
If the power is cut off and reconnected, you may operate directly without Learning.
CB4M-S
DKP3