Most Modern Fan FC-001 Installation Instructions And Owner'S Manual Download Page 1

Most Modern Fan Co. products have been in our assortment for several 
years or longer. As we continually work to improve product performance 
and user experience, we occasionally introduce subtle (and sometimes 
dynamic) product changes. These can affect the steps associated with 
assembly and installation of our products depending on when a fan  
was produced.

The instructions posted here are intended to represent our most current 
product versions and configurations and the associated installation 
steps. If your fan or parts of your fan do not appear to match what is 
included here, please contact customer service for guidance and support 
in identifying which version of a fan you may have and provision of the 
associated installation instructions which correspond to that version.

If in doubt, or if you have any questions at all related to assembly, 
installation or operation of your fan, please contact us!

A note about our  

online installation instructions:

 

709 Washington Street, Ashland, OR 97520

tel 888-588-3267, fax 541-482-8418

[email protected]

modernfan.com

Summary of Contents for FC-001


















Reviews: