8
3.
The support module mounting structure must be made of durable , corrosion
resistant and UV resistant material.
4.
Modules should be firmly fixed in place in a manner suitable to withstand all
expected loads, including wind & snow loads. Determine wind loads for the
installation site & consult it from safety departments for the specific requirements.
5.
All hardware like bolts, nuts & washers should be of stainless steel so as to
eliminate the possibility of rust.
6.
The Open circuit Voltage exceeds the rated voltage. Take care that the open
circuit voltage multiplied by the number of modules in series is not higher than the
Max. system voltage (IEC-1000V/ UL 600V)
7.
Module mounting must use the pre-drilled mounting holes in the frame.
8.
Do not drill additional mounting holes on the frame & glass surface of the module.
Doing so will void the warranty
1.
Select the lowest height of the structure to prevent the lowest height of the module
from being covered by snow for a long time in winter.
Ground Mount
