manualshive.com logo in svg

Moseley Starlink SL9003Q, User Manual, Page: 46 / 141

Share
Download
Moseley Starlink SL9003Q User Manual Download Page 46

4-6          

Section 4: Operation 

Moseley SL9003Q 

 

602-12016-01 Revision J 

 

Figure 4-4. Top Level Screen Menu Structure 

 NOTE

: There may be minor differences in the purchased unit, due to software 

enhancements and revisions. The current software revision can be noted in the SYSTEM 
sub-menu (under INFO). 

CAUTION 

DO NOT change any settings in the CONFIGURE or CALIBRATE screens. The 

security lock-out features of the software may not be fully implemented, and 

changing a setting will most likely render the system non-operational! 

4.4 Screen 

Menu 

Summaries 

The following tables and text provide a screen view for that topic as well as the functions 
and settings of that screen. A summary of each function and the user manual location for 

additional information is also provided. 

4.4.1 Meter 

 

Function Settings 

Summary 

Bargraph 

ENCDR1, 2, … 
DECDR1, 2, … 
NONE 

Selects the audio source for display on the audio level 
bargraph 
Turns off the bargraph 

LED Dsp 

A 
B 

Used for future option 

Summary of Contents for Starlink SL9003Q














































































































































Reviews:

No comments