Moseley Starlink SL9003Q, User Manual, Page: 45 / 141

Section 4: Operation 4-5
Moseley SL9003Q 602-12016-01 Revision J
Figure 4-3. Radio Launch Menu Screen Navigation
4.3.2 Saving Settings (system-wide)
The SAVE SETTINGS screen will appear when you change a configure or control screen .
If this screen appears, and you did not intend to change anything, select NO (using the
RIGHT/LEFT arrows) and press ENTER.
CAUTION:
This is a system-wide choice. If you select YES and press the ENTER button,
any settings that were changed since the last save WILL BE SAVED to power-on
memory.
NOTE:
Most settings in the Configuration Screens will cause that setting to change
immediately. HOWEVER, if you choose NO (above), a power reset will bring the
unit back to the previous settings.
4.3.3 Screen Menu Structure
Figure 4-4 shows the top level structure of the menu system. Go to the indicated section for
the selected LCD Screen Menu.
In general, <ENTER> will take you to the next screen from a menu choice, <UP> or
<DOWN> will scroll through screens within a menu choice, and <ESC> will take you back
up one menu level. Certain configuration screens have exceptions to this rule, and are noted
later in this section.