OVERVIEW
Description
Patch audio, pitch, and more with peace of mind using the Buffered Signal Multiplier. Due to its
intelligent normalization scheme, it can copy 2 inputs to 4 respective outputs, or 1 input to all eight
outputs, while maintaining integrity and consistency between the signals. The LEDs indicate level
and polarity of the incoming signal for easy identification.
• Buffered signal multiple
• Intelligent normalization scheme
• Configurable as 2x4 or 1x8
• Ideal for lossless splitting of audio and pitch signals
• LEDs indicated level and polarity of incoming signals
Tech Specs
• Width: 14HP
• 38mm
• Front Panel: Ships in Intellijel format. Pulp Logic replacement panels available
.
• Current Consumption: +12V = 16mA, -12V = 16mA
Installation
To install, locate space in your Eurorack case for your 1U module, and confirm the positive 12 volts
and negative 12 volts sides of the power distribution lines. Plug the connector into the power distri-
bution board of your case, keeping in mind that the red band corresponds to negative 12 volts. In
most systems, the negative 12 volt supply line is at the bottom. The power cable should be connect-
ed to the module with the red band facing the front of the module.
2
