574.293.1581
MORryde.com
INTENDED USE & FEATURES
•
Stabilizers help to control the side-to-side rocking of a chassis when parked for a sturdier camping experience.
•
Note:
The stabilizer system will not lift the rear tires of the unit off the ground and is not a substitute for jacks.
•
The arms are controlled independently of each other to adjust to varying terrains.
•
Stabilizers have a wide base of support to provide a stable feel in the motorhome.
WARNING
Stand clear of the stabilizer assembly during the extension and retraction of the stabilizer arms. Do not put any part
of your body between the stabilizer and the ground or between the stabilizer and the chassis.
OPERATING PROCEDURE
Note:
Once the stabilizers are either fully extended or fully retracted, it is important to return the buttons to the neutral position. As a precaution, the thermal
overload fuse on the circuit will trip if the button is depressed for too long and will reset automatically after cooling off. However, this should not be regularly
used as a cue for when to release the buttons.
Warning:
If a buzzer sounds when turning the key in the ignition of the coach, one or both of the stabilizer arms is extended. To resolve, retract the arms.
MORryde STABILIZER
O W N E R ’ S M A N U A L
Outriggers
Foot Plate
Foot Plate
Stabilizer
Assembly
Use the extend and retract
buttons in the coach to extend
or retract the stabilizer arms. The
arms operate and are controlled
independently of one another.
TO EXTEND:
Press the “EXT” buttons
until each arm reaches the ground.
The sound of the motor will change
pitch as the arms begin to take weight.
Adjust each side independently for
desired stability.
TO RETRACT:
Press the “RET”
buttons simultaneously until
each arm is fully retracted.
PARTS LISTING
•
Outriggers
•
Stabilizer assembly
•
Optional foot plate on the
end of the stabilizer arm
•
Hardware
1
2
3
Step
Step
Step