Morris CX 8105, Operator'S Manual, Page: 32 / 182

Introduction
4-2 December 2016 CX 8105 - Ground Drive
Introduction
This Operator’s Manual has been carefully prepared
to provide the necessary information regarding the
operation and adjustments, so that you may obtain
maximum service and satisfaction from your new
MORRIS CX 8105 Air Drill.
To protect your investment, study your manual before
starting or operating in the field. Learn how to operate
and service your CX 8105 Air Drill correctly, failure to do
so could result in personal injury or equipment damage.
If you should find that you require information not
covered in this manual, contact your local MORRIS
Dealer. The Dealer will be glad to answer any questions
that may arise regarding the operation of your MORRIS
CX 8105 Air Drill.
MORRIS Dealers are kept informed on the best methods
of servicing and are equipped to provide prompt efficient
service if needed.
Occasionally, your CX 8105 Air Drill may require
replacement parts. Your Dealer will be able to supply you
with the necessary replacement parts required. If the
Dealer does not have the necessary part, the MORRIS
Factory will supply the Dealer with it promptly.
Your MORRIS CX 8105 Air Drill is designed to give
satisfaction even under difficult conditions. A small
amount of time and effort spent in protecting it against
rust, wear and replacing worn parts will increase the
life and trade-in value.
Keep this book handy for ready reference at all times. It is the policy of Morris Industries Ltd. to improve its
products whenever it is possible to do so. The Company reserves the right to make changes or add improvements
at any time without incurring any obligation to make such changes on machines sold previously.