Morris CX 8105, Operator'S Manual, Page: 179 / 182

Troubleshooting
Problem Cause
Correction
CX 8105 - Ground Drive December 2016 9-11
Opener pressure drops
q u i c k ly d u r i n g n o r m a l
operation.
(more than 150psi after
charging system).
Excessive seed depth and
soil throw.
Openers not fully lifting to
transport position.
Hydraulic line, fitting or cylinder
leak.
Damaged or stuck pilot operated
check valve.
Soft field conditions.
Ground speed too fast.
Hydraulic pressure too high.
Air in hydraulic lines.
Parallel link pivot bolts too tight.
Locate leaking line, fitting or cylinder and repair
or replace.
Replace valve.
Reduce pressure and seed depth settings.
Reduce speed and re-check depth.
Reduce pressure and re-check depth.
Bleed hydraulic system.
Loosen pivot bolts in small increments until all
openers will drop quickly from raised position under
their own weight (put tractor remote in float to allow
openers to drop).
Seed Unit - Continued