Morris CX 8105, Operator'S Manual, Page: 122 / 182

Maintenance
7-6 December 2016 CX 8105 - Ground Drive
Lubrication
Greasing pivot points prevents wear and helps restrict
dirt from entering. However, once dirt does enter a
bearing, it combines with the lubricant and becomes an
abrasive grinding paste, more destructive than grit alone.
• Apply new lubricant frequently during operation to
flush out old contaminated lubricant.
• Use a good grade of lithium based grease.
• Use a good grade of machine oil.
• Clean grease fittings and lubricator gun before
applying lubricant.
Refer to the following photos for grease fitting locations.
1. Drive Chains
• Oil every 50 hours.
2. Slow Speed Drive
• Grease every 50 hours.
3. Articulated Hitch Pivot
• Grease every 50 hours.
4. Cart Wheel Hubs with no Air Brakes
• Grease every 500 hours or seasonally, whichever
occurs first.
5. Cart Wheel Hubs with Air Brakes
• Make sure hubs have oil and the plug is in the hub
caps. Use 80-90 gear lube.
5
4
3
Transmissions
2
1