Morris CDS-1012 Instruction Manual Download Page 1

INSTRUCTION MANUAL

Washing Machine Instruction Manual

CONTENTS

Page

A NOTE TO YOU

Thank you for buying a MORRIS appliance.
MORRIS washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer property and safely.
Please read it carefully.

Economic wash system

Using artificial intelligence, the washer uses minimum energy and water by
selecting optimal water lever and washing time.

Low noise system

The washer minimizes the washing and spinning noises by sensing the
amount of laundry.

Child-Lock

The Child-Lock system has been used to prevent children from pressing any
button to change the program during operation.

Nano-silver sterilization washing(Option)

By applying very fine silver particles on essential parts inside, the washer
sterilizes up to 99.9% as is done by boiling wash.

Air bubble washing(Option)

This is an advanced technology that generates millions of air bubbles inside the drum on washing sequence,
and the bubbles dissolve the detergent particles completely and cleanse all the soil in clothes gently and neatly.

PARTS AND FEATURES.................................................................................................................2

WASHER SAFETY...........................................................................................................................3

INSTALLATION INSTRUCTIONS ....................................................................................................4

INLET HOSE CONNECTION ...........................................................................................................5

ELECTRICAL REQUIREMENTS .....................................................................................................6

OPERATING YOUR WASHER ........................................................................................................7

THE FUNCTIONS OF THE CONTROL PANEL...............................................................................9

WASHING PROGRAM...................................................................................................................11

WASHING PROCEDURE AND SELECTION ................................................................................12

GUIDE FOR OTHER USEFUL PROGRAMS.................................................................................23

MAINTENANCE .............................................................................................................................27

HOW TO CLEAN THE FILTER ......................................................................................................28

REMOVING STAINS ......................................................................................................................29

TROUBLE SHOOTING ..................................................................................................................30

SPECIFICATION ............................................................................................................................31

CDS-1012

Summary of Contents for CDS-1012

































Reviews: