9
We recommend storing the steam cleaner in the
carpet glider
(30)
, but with the cloths removed.
Swing the upright handle
(3)
down by pressing the
collapsible handle release/restore button
(5)
.
Rotate the upper cord storage hook
(4)
to an
upwards position. Wrap the power cord
(17)
around the two cord storage hooks
(4/21)
.
Secure the cord in place using the power cord clip
(18)
.
WARNING: Always unplug the steam cleaner
from the mains supply before undertaking any
maintenance procedures.
Maintaining the motorised floor brush (27)
Ensure the power cord
(17)
is unplugged from the
mains outlet.
Remove the dust tray
(24)
.
Lay the appliance flat on a stable surface and turn
it over so the underside of the floorhead
(22)
is
facing upwards to enable you to inspect the
motorised floor brush. Pull away any hairs or
fibres. If they are tightly wound around the brush,
carefully snip the fibres with scissors, being
careful not to damage the motorised floor brush,
pull away from the motorised floor brush and
dispose of in a bin.
It may be necessary to clean the motorised floor
brush more thoroughly by removing it. To do this,
first remove the motorised floor brush viewing
window
(26)
, to do this, pull away the catches
(31)
next to the two wheels and lift away the viewing
window.
Next, lift out the motorised floor brush end cover
(32)
by pushing in the clip
(33)
.
Lift out the motorised floor brush
(27)
at the belt end
(35)
first and slip the belt
(37)
off from the floor brush.
Then pull out the other end of the floor brush
(34)
.
Maintenance
Storage
37
VC720503MUK Rev1_Instruction Book 09/08/2013 09:30 Page 9
