Switching the product on
5
Press the collapsible handle release/restore
button
(5)
, then swing the upright handle
(3)
upwards until it clicks into place in an upright
position.
Rotate the upper cord storage hook
(4)
to quickly
release the power cord
(17)
.
Secure the power cord in the cord holder
(2)
whilst using the cleaner.
1
2
IMPORTANT: Please remember that the steam cleaner operates by emitting steam at an increased
temperature of 115
o
C. Always test on an inconspicuous area first. Never use it on objects or surfaces
which cannot resist this temperature, or on surfaces with coatings or polishes, or on delicate materials
such as dralon, plastic, natural fur or antique items etc.
If in doubt, check carefully on a part of the material where minor marks will not matter.
Operating the appliance
Connect the plug to the mains supply. Switch the
product on using the on/off button
(13)
.
The low steam level indicator light
(11)
will illuminate
to show the product is active.
3
Assembling the appliance
Slide the steam outlet at the base of the main body
(13)
onto the mating spigot of the floorhead
(22)
and
secure with the floorhead securing screw
(20)
provided. A cross-head screwdriver will be required
to tighten the screw.
NOTE: The floorhead securing screw is supplied in a
small plastic bag taped on the inside of the internal
packing sleeve.
VC720503MUK Rev1_Instruction Book 09/08/2013 09:30 Page 5
