Morphy Richards IB73370 Instructions Manual Download Page 1

P

Pe

errffo

orrm

mA

Aiirr  L

Liig

gh

htt  U

Up

prriig

gh

htt  V

Va

ac

cu

uu

um

m

Please read and keep these instructions

Getting the best from your new cleaner...

Filters

It is important that the pleated filter is clicked clean each time the dust 
canister is emptied to allow air through the appliance. Wash the pleated
filter regularly in warm water and allow to air dry. A spare pleated filter is included.

Blockages

Check nozzles, tubes, hose and connectors for blockages. 
Note: The floor nozzle hose can be released for inspection see page 6.

Adjustable height handle

You can adjust the handle height to suit different height users, for carrying 
and for storage. Please see page 4 for details.

Safety cut-out

Both the suction and beater bar motors are protected by safety cut-outs. 

See page 6 for more details. If these operate it is important to unplug 
from the main supply before attempting any remedial action.

Allergy sufferers

See page 5 for emptying advice. 

Brush bar switch off

IMPORTANT: THE ROTATING BRUSH BAR WILL AUTOMATICALLY 
STOP WHEN THE CLEANER IS PUT INTO THE UPRIGHT POSITION.

VC73370MUK Rev 5

For replacement parts, help with using your Morphy Richards product,
problems and lots more, contact us by phone or through our website.

UK Helpline: 0870 060 2604 
Replacement parts: 0870 167 6635
Ireland 1800 409119

73370 rev5  19/12/06  13:09  Page 1

Summary of Contents for IB73370









Reviews: