6
seven minutes to reach the correct
temperature.
3
When the correct temperature has been
reached the orange thermostat indicator
light will go out. The steam cleaner is
now ready to use.
The orange thermostat indicator light will
cycle on-and-off during operation to show
that the steamer is maintaining the correct
temperature.
WARNING: To avoid injury, the
cleaner should be switched off during
breaks or pauses of work. For extra
safety apply the trigger safety lock.
If you leave the working area, please
switch the cleaner off and unplug.
Steam cleaning
1
Ensure the safety lock
Â
is off. Push the
lock from the left side to lock the trigger
and push from the right to release the
lock
H
.
2
Press the steam trigger and steam will be
emitted from the nozzle. Direct the steam
at a cloth or into a bucket or sink until the
steam is emitted evenly.
WARNING: At the start hot water
may be ejected.
WARNING: Aim the steam safely.
3
Keep the steam trigger pressed and
direct the steam at the surface to be
cleaned, removing the dirt by moving the
steam jet backwards and forwards over
the area.
4
To stop the steam jet, release the steam
trigger.
IMPORTANT: Do not hold the steam jet
concentrated in one place for too long.
•
To control the steam temperature and the
cleaning power move the handle closer to
or further away from the surface being
cleaned.
Steam adjustment
The steam adjustment control
‚
varies
the steam output. Turn the knob fully anti-
clockwise for the maximum amount of steam
or clockwise for decreasing amounts of
steam
I
.
Accessories
WARNING: Unplug the steamer and
allow to cool before fitting or changing
attachments as they become hot during
use.
Attach the desired accessory to the hose
handle
‰
. Extension tubes can be attached
to the handle for extra reach.
1
Push the extension tubes
Ë
onto the
handle connection nozzle as far as they
will go until you hear a click
J
.
•
Some tasks may be easier with only one
tube fitted or non at all.
I
H
J
