manualshive.com logo in svg

Morphy Richards Fusion 70045, Instructions Manual, Page: 1 / 12

Share
Download
Morphy Richards Fusion 70045 Instructions Manual Download Page 1

Fusion bagless cylinder vacuum cleaners

Please read and keep these instructions

www.morphyrichards.co.uk

getting the best from your 
new cleaner...

If your cleaner is not picking up as well as it should,
please check

• Filters

It is important that the airbox and filters are cleaned regularly to allow

air through the appliance. Tap to remove dust, the filter can also be

washed in warm water and left to air dry.

IMPORTANT - Ensure filter is totally dry before refitting into machine.

A spare pleated filter is provided, this allows one to be washed

and dried whilst the other is in use.

If you find that washing the filter is a problem we can help. Call our

dedicated 

helpline on 0870 060 2604

for further details.

• Blockages

Check the hose, handle and tools for blockages.

• Overheating protection

The cleaner automatically cuts off in the event of overheating caused

by blocked hoses / filters. Remove plug, clear blockage and allow 15

minutes for the cleaner to automatically reset.

Summary of Contents for Fusion 70045













Reviews:

No comments