background image

Descaling

IMPORTANT: As this appliance
is fitted with a concealed
element it must be descaled
regularly. The  frequency  of
descaling depends on usage
and the hardness of the water in
your area.

Excessive scale can cause the
appliance to switch off before
boiling and may damage the
element invalidating the
warranty.

It is essential that regular
descaling takes place.

Remove hard scale using a
proprietary descaling product
suitable for stainless steel, glass
or plastic.

For stainless steel kettles please
follow the instructions carefully.

Alternatively use citric acid
crystals (available from most
pharmacies) as follows:

1

Fill the appliance 

3/4 

full, boil,

then unplug the appliance
(remove the cordless kettle from
the base unit) and stand it in an
empty sink or bowl.

2

Gradually add 50gm of citric
acid crystals to the water, then
leave the kettle to stand. Do not
use a more concentrated
solution.

3

As soon as the effervescence
subsides, empty the appliance
and rinse it thoroughly with cold
water.

4

Wipe the outside of the
appliance thoroughly with a
damp cloth to remove all traces
of acid which may damage the
finish.

IMPORTANT: Ensure that the
electrical connections are
completely dry before using the
appliance.

HINTS AND TIPS

Cleaning and
maintenance

WARNING: Always
disconnect the plug from
the mains and allow the
appliance to cool before
cleaning.

Wipe the outside with a damp
cloth.

IMPORTANT: Do not use
abrasive cleaners on the outside
of the appliance which may
scratch the surface.

HELPLINE

If you have any difficulty with
your appliance, do not hesitate
to call us.

We are more likely to be able to
help than the store from where
you bought it.

Please have the following
information ready to enable our
staff to deal with your query
quickly.

Name of the product.

Model number as shown on the
underside of the appliance.

Serial number as shown on
underside of the appliance.

UK Helpline

0870 060 2611

Replacement Parts

0870 167 6642

Ireland Helpline

1800 4091195

5

5

U

UK

K  H

He

ellp

plliin

ne

e  0

08

87

70

0  0

06

60

0  2

26

61

11

1      

R

Re

ep

plla

ac

ce

em

me

en

ntt  P

Pa

arrtts

s  0

08

87

70

0  1

16

67

7  6

66

64

42

2

IIrre

ella

an

nd

d  H

He

ellp

plliin

ne

e  1

18

80

00

0  4

40

09

91

11

19

9

43127 rev1  23/3/07  10:03  Page 1

Summary of Contents for 43127 ILLUMA GLASS KETTLE







Reviews: