TRS MIDI Outputs - 1/4 Inch
Switchable TRS MIDI Configuration
Exp ports 1 and 2 (Omniports) on the MC6 can also be set to send MIDI via TRS. The TRS configuration can be adjusted via the menus on the
device itself or by using the Device Editor.
There are 3 TRS MIDI configurations available:
MIDI Out - Standard : Send MIDI via the Tip and the Ring is powered
MIDI Out - Tip Active : Send MIDI via the Tip and Ring is unpowered (floating)
MIDI Out - Ring Active: Send MIDI via the Ring and Tip is unpowered (floating)
Copy, Paste and Swap Presets
You can copy, paste and swap presets on your MC6. These options are available on the device itself (press the switch you want to copy, press
[D+F] > Preset > Copy, Paste, Swap) and on the Device Editor.
