MANUAL OPERATION B-89
The relationship between the OVERRIDE dial setting and actual feedrate is indicated below.
8)
Move the C-axis.
<Counterclockwise rotation, viewing the
workpiece from the spindle side>
Press the
(+C) switch.
In the case of spindle 2, press the
(
C)
switch. (S type)
<Clockwise rotation, viewing the workpiece from
the spindle side>
Press the
(
C) switch.
In the case of spindle 2, press the
(+C)
switch. (S type)
The C-axis moves at the set jog feedrate.
14-8
C-axis Handle Feed Operation
While the rotary tool spindle is selected, the C-axis can be fed with set feedrate using the manual
pulse generator.
1)
Place the DOOR INTERLOCK key-switch in the
NORMAL
position.
2)
Close the front door.
3)
Place the PANEL key-switch in one of the positions
indicated below.
(ON)
(PANEL/EDIT)
Setting
0
10
20
30
40
50
60
70
Feedrate (min
1
)
0
0.006
0.009
0.014
0.022
0.035
0.056
0.089
Setting
80
90
100
110
120
130
140
150
Feedrate (min
1
)
0.139
0.219
0.35
0.556
0.889
1.389
2.194
3.5
Y
Y
+C
C
AXIS DIRECTION
+C
NOTE
–C
–C
NOTE
+C
DOOR INTERLOCK
NORMAL
RELEASE
ON
PANEL
/EDIT
OFF
PANEL
