A-100 OPERATION PANELS
7-3-3
Work Coordinates Data Setting Screen
Function selection key
(OFFSET)
[WORK]
The shift data of the work coordinate systems is displayed. This function is used to select the work
coordinate system using the codes G54 to G59.
The function is also used to shift the coordinate system which is already set in the following
cases:
The coordinate system set using the work coordinate system setting function (G54 to G59)
or the automatic coordinate system setting function (G50), does not agree with the
coordinate system assumed when programming.
To execute a program check
Move the cursor to the work coordinate system number
(NO.) to be set, using the page selection keys and the
cursor control keys.
Make sure to set "0" at the DATA (coordinate
system shift data) column of the work
coordinate system NO. "00 (EXT)" on the
WORK COORDINATES screen.
If the work coordinate system shift data is set
for NO. "00 (EXT)", the work coordinate
system is shifted in the same direction
disregarding of the spindle (spindle 1 and
spindle 2) to be used, which causes the turret
to interfere with the workpiece resulting in
machine damage.
<Transition of soft-keys>
Press the
[CHANGE]
soft-key and the coordinate system name displayed on the screen changes
in the followin sequence at each pressing of this soft-key.
OFFSET
CAUTION
(+)
INPUT
WEAR
WEAR
SET UP
SET UP
GEOM.
GEOM.
WORK
WORK
MEASURE
CHANGE
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
MACHINE
INCREMENTAL
ABSOLUTE
