OPERATION PANELS A-93
7-2-2
Program Directory Screen
Function selection key
(PROG)
[PROG. LIST]
In the foreground edit operation, the PROGRAM directory screen can be displayed only in
the edit, memory, or tape mode.
Function selection key
(PROG)
[BG EDIT]
[PROG. LIST]
The directory of registered programs and memory used
size are displayed. This screen is used to check the
programs registered in the memory, the number of
registered programs, and the free memory size.
In the edit mode or in background edit operation, the
screen is used for selecting the program to be edited. In
the memory mode, it is used for selecting the program to
be executed.
The contents of a program can be displayed on the
screen by following the steps indicated below.
1)
Move the cursor to the desired program using the
cursor control keys
and
.
2)
Press the
(INPUT) key.
The contents of the selected program is displayed.
The display items are explained below:
1.
AVAILABLE (byte/m)
Allowable size of programs that can be additionally stored in memory is displayed.
The unit (byte/m) of the AVAILABLE is allowed to change by setting the parameters.
2.
POSSIBLE REGIST. PROGRAMS (num.)
Allowable number of programs that can be additionally stored in memory is displayed.
Creation of a new program or editing a program to add commands are not allowed if there
is no free area in memory even when the number of registered programs is smaller than
the maximum storable number of programs.
3.
REGIST. PROGRAMS (num.)
The number of registered programs is displayed.
4.
PROGRAM directory
The program numbers of registered programs, comments and the size of the individual
program are displayed.
To create a new program, use a program number that is not displayed in the table of
PROGRAM directory.
PROG
NOTE
PROG
4
1
2
3
INPUT
NOTE
NOTE
