E-28 PREPARATION BEFORE STARTING MASS PRODUCTION
9
SETTING THE INHIBITED TOOL ENTRY ZONE
To avoid interference of a cutting tool with the workpiece, chuck, or jaws, set the inhibited tool
entry zone using the optional G22 command (stored stroke limit function ON).
Inhibit the entry of a cutting tool into the zone defined
using the stored stroke limit function.
If the cutting tool is going to be moved in the zone, the
related alarm message is displayed on the screen and the
axes stop moving.
If the axes are stopped due to an alarm, axis feed
is possible only in the direction opposite to the
direction the axis has been moved.
For details of the procedure to set the inhibited
tool entry zone, refer to the PROGRAMMING
MANUAL.
NOTE
