MANUAL OPERATION B-61
13-4
Moving the Tailstock Body
<Unclamping the tailstock body>
Pull the tailstock body clamp lever down.
<Moving the tailstock body>
Advance: Turn the tailstock body moving handle counterclockwise.
Retract: Turn the tailstock body moving handle clockwise.
<Clamping the tailstock body>
Pull the tailstock body clamp lever up.
When the tailstock body is clamped, the dog touches the confirmation switch provided above the
dog and the switch is turned ON.
1.
After clamping the tailstock body, check visually that the dog touches the
confirmation switch.
2.
If the tailstock body is not clamped correctly, automatic operation cannot be
executed and an alarm occurs, when the
(START) switch is pressed.
WARNING
Before moving the tailstock body, turn off the power supply.
If an attempt is made to move the tailstock body while the power is on, the
machine may start operating unexpectedly, causing the operator to be
entangled with its rotating parts or caught by its moving parts and
seriously injured.
NOTE
Confirmation switch
Dog
