MANUAL OPERATION B-51
12-6
C-axis Rapid Traverse Operation
While the rotary tool spindle is selected, the C-axis can be fed at the set rapid traverse rate.
When the rotary tool spindle is selected, the indicator in the MILLING switch
(MIL) is
lit.
1)
Place the DOOR INTERLOCK key-switch in the
NORMAL
position.
2)
Close the front door.
3)
Place the PANEL key-switch in one of the positions
indicated below.
(ON)
(PANEL/EDIT)
4)
Select the rapid traverse mode (
) with the
MODE selection switch.
5)
Press the MILLING switch
(MIL).
The rotary tool spindle is selected.
The indicator in the switch is lit.
6)
Press the
(UCL) switch.
The spindle is unclamped.
DOOR INTERLOCK
NORMAL
RELEASE
ON
PANEL
/EDIT
OFF
PANEL
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
MILLING
SP
UCL
CL
MIL
