A-36 OPERATION PANELS
5-8-1
Construction of the Chuck Opening/Closing Footswitch
The footswitch has a shield cover and lock device to prevent the chuck being operated
unexpectedly - the footswitch is protected from objects falling onto it and careless foot operation.
1.
Never operate the machine without the shield cover and/or the lock device fitted
to the chuck opening/closing footswitch. If the footswitch pedal is stepped on
carelessly or if an object falls onto the pedal, the chuck will be unclamped and
allow the workpiece held in the chuck to fall, causing machine damage.
2.
Take care not to stumble over the footswitch since you may be injured.
<Construction of the footswitch>
By pushing the lock release plate forward, the lock is
released and the footswitch pedal can be stepped on.
At the center of the footswitch base plate, holes are
provided at the front and the rear. Use these two holes
when fixing the footswitch in place.
<Construction of the twin footswitch (option)>
By pushing the lock release plate forward, the lock is
released and the footswitch pedal can be stepped on.
At the center of the footswitch base plate, holes are
provided at the front and the rear. Use these two holes
when fixing the footswitch in place.
CAUTION
Shield cover
Lock release
plate
Footswitch fixing holes
Lock device
Shield cover
Lock release
plate
Lock device
Footswitch fixing holes
