OPERATION PANELS A-21
When this switch is pressed, the indicator in the switch is lit and the handle mode
is selected.
In the handle mode, the axis selected with the axis selection switch is moved as
the manual pulse generator is turned.
The axis feed amount per pulse conforms to the setting of the axis feed amount
selection switches.
Close the front door before carrying out handle feed operation.
When this switch is pressed, the indicator in the switch is lit and the jog mode is
selected.
In the jog mode, axes are moved at the jog feedrate.
An axis is moved while an axis feed switch is held down at the feedrate set with
the OVERRIDE dial. Setting is possible in 16 steps in the range of 0 to
1260 mm/min.
Close the front door before carrying out jog feed operation.
When this switch is pressed, the indicator in the switch is lit and the rapid
traverse mode is selected.
In the rapid traverse mode, axes are moved at the rapid traverse rate.
An axis is moved at the rapid traverse rate while an axis feed switch is held
down.
Close the front door before carrying out rapid traverse operation.
When this switch is pressed, the indicator in the switch is lit and the zero return
mode is selected.
In the zero return mode, an axis is manually returned to the zero point.
Close the front door before carrying out zero return operation.
Switch
Function
H
NOTE
JOG
NOTE
RPD
NOTE
ZRN
NOTE
