mori seiki NL1500/500, Maintenance Manual, Page: 187 / 245

187
ɹ˂ʳʽʒʰʕʍʒɁႱࢠ
COOLANT UNIT PROBLEMS
4)
ʃʒʶ˂ʔɥ՘ɝ۶Ȭǿ
4)
Remove the strainer.
5)
ʃʒʶ˂ʔȟᄻᝇɑɝȪȹȗɞکնɂǾ฼๎Ȭɞǿ
5)
If clogged, clean the strainer.
6)
ʃʒʶ˂ʔʥʵʊȾҒɝȢȭȟໆɑȶȹȗɞکնɂǾ̔ȗ
ȲɰɲʃȺઝȠ՘ɞǿ
6)
If chips have accumulated inside the strainer holder,
remove them with a clean and dry cloth.
7)
ґᜓȻᣡɁᬲࣃȺጸɒ቏ȹɞǿ
7)
Reverse the above procedure to reassemble the pump.
8)
ɹ˂ʳʽʒʧʽʡɥͽӦȨȮȹǾɹ˂ʳʽʒȟվҋȬɞȦ
ȻɥᆬᝓȬɞǿ
8)
Operate the coolant pump to confirm coolant is supplied.
ҏ࿎իᴥࡾщʥʵʊᴦɹ˂ʳʽʒʘʄʵɁᄻᝇɑɝ
Turret (Tool Holder) Coolant Nozzle Clogging
8
ឬ֖
8
WARNING
ൡಽ᫖ໃɥȪɖ୽ȪȹȢȳȨȗǿ
Turn OFF the main power.
ᴹਖ਼ᬲᴻ
<Procedure>
1)
ൡಽ᫖ໃɥȪɖ୽Ȭɞǿ
1)
Turn OFF the main power.
2)
ɹ˂ʳʽʒȟվҋȨɟȽȗɹ˂ʳʽʒʘʄʵɥِްȪȹȗ
ɞɀȫ
1
టɥфᜏʶʽʋȺ՘ɝ۶ȪǾɹ˂ʳʽʒʘʄʵɥ
՘ɝ۶Ȭǿ
2)
Using a hex wrench, remove the single screw securing the
clogged coolant nozzle and remove coolant nozzle.
3)
ᦉᦂȽȼጯȗɕɁɥࢃȪᣅɒǾɹ˂ʳʽʒʘʄʵȾᝇɑȶ
ȹȗɞҒɝȢȭɥɎȣȬǿ
3)
Insert a thin wire into the coolant nozzle to remove chips
clogging the nozzle outlet.
4)
ɹ˂ʳʽʒʘʄʵɥЫɁͱᏚȾ੒ȪǾɀȫȺِްȬɞǿ
4)
Return the coolant nozzle to its original position and secure
it with the single screw.
5)
ɹ˂ʳʽʒɥվҋȨȮǾᝇɑɝȟ᪍ՍȨɟȲȦȻɥᆬᝓȬ
ɞǿ
5)
Supply coolant to confirm that the clogging has gone.
M6 Hexagon Socket Head Cap Screws
Strainer
M6
фᜏሰ͇Ƞʦʵʒ
ʃʒʶ˂ʔ